Chapter 10 Setup Operations
10-27
10
Setup Operations
Setting the time – F2 (TIME)
To set the time, use the following procedure.
1
Press F2 (TIME).
The current time setting appears in the numeric keypad area.
2
Using the numeric keypad, enter the time in the format
hh.mm.ss, using the 24-hour clock.
For example, to set the time to 13:15 and 20 seconds, enter
13.15.20.
3
Press the ENTER button in the numeric keypad section.
This confirms the time setting on the menu screen.
Selecting the frequency mode – F3 (FREQ)
Press F3 (FREQ) to select any of the 23.98Hz, 24.00Hz, 25.00Hz,
30.00Hz, 50.00Hz, 59.94 Hz, or 60.00 Hz mode.
Selecting 1035 lines or 1080 lines – F4 (ACTIVE LINE)
Press F5 (ACTIVE LINE) to select 1035 or 1080 active scan lines.
Selecting the screen aspect ratio – F5 (SCREEN)
Press F4 (SCREEN) to select a 16:9 or 4:3 screen aspect ratio.
