Sony Ericsson Xperia SO-03d, Инструкция по эксплуатации

Страница: 165 / 286

163 File management
Transferring data using Media Go
1
Connect the terminal to a PC using
a microUSB cable.
･
When "PC Companion software" screen
appears on the terminal, tap [Skip].
2
Select Media Go from the PC's start
menu and activate Media Go.
･
Using Media Go, you can move files
between the terminal and the PC.
You can send/receive data of contacts,
photos or videos taken by the camera to/
from terminals etc. supporting infrared
communication function.
･ The communication range for infrared
communication is 20 cm or less. Keep the
devices pointing at the infrared data port
each other, and do not move them until data
exchange completes.
･
If the infrared data port is soiled, clean the
data port with a dry soft cloth to prevent from
scratching. Performing infrared
communication with the data port soiled or
scratched may cause communication failure.
･
Infrared communication may not be
performed in areas exposed to direct sunlight,
directly under fluorescent lights or near
infrared devices.
･
Depending on the terminal of the other party,
it may be difficult to exchange data.
❖
Information
･
Do not cover the infrared data port with the fingers,
etc. while performing infrared communication.
･
Infrared communication for the terminal conforms to
IrMC version 1.1. However, some data cannot be sent
or received even if the receiver's phone conforms
IrMC version 1.1.
･
Authentication passcode may be required while
sending or receiving infrared data. Authentication
passcode is a 4-digit number fixed up between you
and other party in advance. The same number string
must be entered by the sender and receiver.
Using Infrared
communication
Infrared data port
Within 20cm
Within ±15° from
the center