Sonel PAT-80, Руководство пользователя

Страница: 84 / 100

PAT-80
● PAT-85 ● PAT-86 – USER MANUAL
82
11 Storage
In the case of storage of the device, the following recommendations must be observed:

disconnect all the test leads from the tester,

clean the tester and all its accessories thoroughly.

recharge the battery every 3 months.
12 Dismantling and Disposal
Used electrical and electronic equipment should be collected selectively, i.e. it must not be
placed with other kinds of waste.
Used electronic equipment should be sent to a collection point in accordance with the Used Elec-
trical and Electronic Equipment Act.
Before the equipment is sent to a collection point, do not dismantle any elements.
Observe the local regulations concerning disposal of packages.
13 Technical data

Abbreviation ‘m.v.’ used in the specification of measurement uncertainty means a standard
measured value.

Ranges and uncertainties are additionally provided according to DIN VDE 404-1.
13.1 Measurement of network parameters
Measurement of network voltage
Range Resolution Basic uncertainty
195.0 V…265.0 V
0.1 V

(2% m.v. + 2 digits)

measurement of the mains voltage between L and N of the power supply
Measurement of network frequency
Range Resolution Basic uncertainty
45.0 Hz…65.0 Hz
0.1 Hz

(2% m.v. + 2 digits)

measurement of the mains voltage frequency of the power supply

for the set value of 50 Hz, the range is 45 ... 55 Hz

for the set value of 60 Hz, the range is 55 ... 65 Hz
Measurement of voltage occurring in PE line
Range Resolution Basic uncertainty *
0.0 V…59.9 V
0.1 V

(2% m.v. + 2 digits)
* for U < 5 V accuracy is not specified

measurement of the mains voltage between PE and N of the power supply