Sonel PAT-80, Руководство пользователя

Страница: 53 / 100

PAT-80
● PAT-85 ● PAT-86 – USER MANUAL
51
4.8 Measurement of current with clamp
Press I
CLAMP
.
Before starting the measurement, similarly to sec. 4.2 , following parameters must be set: test dura-
tion and limit .
Attach clamp around measured conductor.
Press START .
Upon completing the measurement read the result. You can finish the
test before the defined test time duration by pressing
STOP .
Positive test result: I
C
≤ LIMIT
Negative test result: I
C
> LIMIT
NOTE!
During the measurement, the same mains voltage is present at the measuring socket
which powers the tested appliance.