Sonel PAT-80 Скачать руководство пользователя

Страница: 15 / 100

PAT-80

● PAT-85 ● PAT-86 – USER MANUAL

3.3.4

Measurement settings

Press

Configuration of tester

Select

Test

Tick checkboxes corresponding
to the desired options.

Then

set test parameters



type, frequency and volt-
age of the mains that the
meter is powered from,



measurement delay.

Warnings
Show warning about dangerous voltage

– switch on/off warnings about the possibility of the volt-

age being dangerous to user that may appear during tests.

Show warning about switched off appliance

– switch on/off notification that the tested appliance is

not connected or it's not turned on.

NOTE!

It is advised for less experienced users to keep all the above warnings on.

Auto-tests
Perform auto-tests automatically

– switch on/off automatic mode of performing autotests, which is

performing the complete set of autotests after single press of

START

button.

NOTE!

It is advised for less experienced users to keep all the above warnings on.

Polarity IEC L-N:
Allow reverse polarity IEC L-N

– allows interchanging of L and N lines in the tested IEC cord. The

test result is displayed as positive.

Содержание PAT-80





































































































Результаты поиска

Содержание PAT-80

Отзывы:

Похожие инструкции для PAT-80

Бренды по названию

Популярные бренды

Sonel PAT-80, Руководство пользователя

Результаты поиска

Содержание PAT-80

Отзывы:

Похожие инструкции для PAT-80

Бренды по названию

Популярные бренды