182
7-20
7-21
7-22
7-23
3
6
4
7
8
Operation
7.1.3 Start optimisation/weight
minimisation
Procedure:
—
Clamp the wheel or bare rim.
—
Enter correct rim dimensions, or check existing
inputs for correctness.
Close the wheel guard (if necessary press the
START
key).
—
Starting from the BALANCING menu press key
6 Optimisation – Minimisation (Fig. 7-20).
The OPTIMISATION MENU “1” screen (
Fig. 7-21
) is
displayed.
If an optimisation/weight minimisation result has
already been saved, press the
7
key (
Fig. 7-22
); The
program then continues from the step where it was
interrupted, with the relative measurement values and
the balancing optimisation / weight minimisation may
continue.
At this point, you can choose whether to continue with
Optimisation (Key
8
), or go to Minimisation (Key
4
).
7.1.3.1 OPTIMISATION
Clamp the rim only.
Perform a measuring run.
In the BALANCING menu press keys
6
and
3
(
Fig.
7-20
).
The OPTIMSATION “1” screen page appears (
Fig.
7-22
).
—
Press the key 8 (Fig. 7-22).
The OPTIMSATION “2” screen (
Fig. 7-23
) is displayed.
..
_
..........
Содержание JohnBean B2000P Series
Страница 1: ...B2000P Operator s Manual Manuel d Utilisation Betriebsanleitung...
Страница 244: ...244 Blank Page _...
