Snap-on Equipment JohnBean B2000P Series, Руководство оператора

Страница: 10 / 252

10
1-2
a
b c
d
e
f
g
h
1-3
Safety
( figure 1-2 )
1 Pedal to operate the Power Clamp and the main
shaft lock.
Always work in a clean area and with clean wheels.
WARNING
:
THIS MACHINE HAS A SINGLE OPERATING
STATION (
A
). THE OPERATOR IS RESPONSIBLE
FOR RESTRICTING ACCESS TO THE WORK
AREA AND FOR ANY CONSEQUENCE ARISING
FROM USING THE EQUIPMENT
Note
:
THE USE OF THIS DEVICE IS ALLOWED
ONLY TO PERSONNEL DULY TRAINED BY AN
AUTHORIZED DEALER AND IN POSITION (A).
OPERATOR MUST BE NEAR THE MACHINE IN
GOOD WORKING POSITION; CONTROL SIDE (A).
1.1 Typographical conventions
This manual contains text styles intended to make the
reader pay extra attention:
Note : Suggestion or explanation.
CAUTION: INDICATES THAT THE FOLLOWING
ACTION MAY RESULT IN DAMAGE TO THE UNIT
OR OBJECTS ATTACHED TO IT.
WARNING : INDICATES THAT THE FOLLOWING
ACTION MAY RESULT IN (SERIOUS) INJURY TO
THE OPERATOR OR OTHERS.
•
Bulleted list:
•
Indicates that action must be taken by the operator
before proceeding to the next step in the sequence.
TOPIC (
F
n°) = see the Chapter number.
The topic indicated is explained in full in the charter
specifi er.
1.1.1 Identification data
An identification plate attached to the machine,
shows the following data Fig. 1-3 :
a- Name and address of the manufacturer
b- Conformity marking
c- Year of manufacture
d- Model
e- Serial number
f- Weight
g- Electric specifications (volt, ph, Hz, kW and A)
h- Acoustic pressure
..
_
..........
1