Snap-on Equipment JohnBean B2000P Series, Руководство оператора

Страница: 158 / 252

158
“ OPTI LINE ”
3
2
1
6-93
6-94
6-95
4
5
6
3
2
1
The “SET OF WHEELS 1” screen page appears
automatically ( Fig. 6-93 ).
The screen page shows new items useful for moving
backwards in the Set of Wheels procedure ( Fig. 6-93 ):
5 Select to exit the “Set of Wheels” Procedure and
the OPTI LINE Mode.
Nota : If the wheel has not yet been removed
from the balance, you can start a new
Set of Wheels and assign the data of
the last wheel, still in the memory, to the
wheel number 1 of the new Set, without
performing the measuring run.
4 Deletes the current Set and starts a new “Set of
Wheels”.
The last wheel examined will be kept and
automatically proposed again as wheel number 1 of
the new Set.
Note : Starting with wheel No. 2, the key will
be available for wheel removal, as an
alternative to entry keys 1 , 2 or 3 ( Fig.
6-93 ).
6 RETURN to the previous step, so that you can
assign the wheel a different use in the Set.
The wheels definitively acquired in the memory
are represented by icons grouped in the “Wheels
Currently in the Set” box ( Fig. 6-94 ). These icons
also show any specific mandatory position assigned:
Fig. 6-94
1 ) Wheel assigned only to right side of vehicle.
2 ) Wheel available for both sides of vehicle.
3
) Wheel assigned only to left side of vehicle.
To continue,
•
Apply the appropriate identification tag to
the wheel valve, with the same number and
colour as the last wheel shown (
Fig. 6-95
).
..
_
..........