Snap-on Equipment JohnBean B2000P Series, Руководство оператора

Страница: 100 / 252

100
“ BALANCE WITH RUNOUT ”
6-36
6-34
6-35
1
2
3
4
OE
OE
“ ASSEMBLY RUNOUT INDICATION ”
The OPTIMA ENTRY key ( OE ), after the measuring
run of a wheel and tyre, allows access to the Screen
in Fig. 6-34 which contains the following:
1 Access the wheel/rim radial Runout .
2 Access the rim radial/lateral Runout.
3 Access the (data) multi position/harmonic
Runout .
4 Access the harmonic 1st, 2nd, 3rd Runout .
WARNING INDICATION
The arrows key ( Fig. 6-35 ) in the Assembly Indication
screen, is used to scroll the messages present, when
there are more than four messages:
• Press the lower
arrow
key to scroll down the list
of messages
• Press the arrow key upwards to scroll up the list
of messages.
“ RIM RUNOUT INDICATION ”
The OPTIMA ENTRY key ( OE ), in Optima mode, after
a bare rim measuring run, allows access to the Screen
in Fig. 6-36 which contains the following:
( Fig. 6-36 )
1
Access the harmonic 1st, 2
nd
and 3rd Runout .
2 Go back to the Assembly Indication screen.
..
_
..........
2
1