Ski-Doo 2005 MACH Z, Руководство по ремонту

Страница: 286 / 343

Section 07 REAR SUSPENSION
Subsection 03 (SHOCK ABSORBER INSPECTION AND SERVICING)
4
2
1
3
A06F0QA
1. High pressure hose
2. Stage regulator, delivery pressure range 2070 kPa (300 PSI)
3. High pressure cylinder filled with industrial grade nitrogen
4. Valve tip (P/N 529 035 570) permanently installed
NOTE: Never substitute another gas for nitrogen.
Nitrogen has been selected for its inert qualities
and will not contaminate the gas chamber of the
shock.
Preset your pressure regulator to 2070 kPa
(300 PSI) nitrogen (N), this gas pressure will re-
store the correct pressure for your damper.
CAUTION: Do not exceed the recommended
pressure values.

WARNING
Whenever working with high pressure gas,
use eye wear protection. Never direct gas
pressure toward anybody.
Install the gas fill tool kit (needle type) (P/N 503
190 102) on gas shock valve tool (tire valve type)
(P/N 529 035 570). Set the regulator pressure
on the nitrogen cylinder as per the shock require-
ment.
Mount the shock on vise. Remove screw on top
of valve. Place the needle guide of gas refill tool
on the shock valve. While depressing the detent
pin of the gas refill tool and pushing forward the
needle assembly, insert the needle through the
rubber core of the pressure valve assembly of the
shock.
503 190 102
A32F38A
529 035 570
NOTE: For replacement of the needle or filling the
shock, carefully follow the instructions provided
with the gas fill tool kit (needle type) (P/N 503 190
102).
On some models, rubber may pop out of needle
valve when inserting tool needle. If so, remove
valve and rubber, reinstall rubber with its larger
diameter last.
1
A32F1SA
1. Larger diameter
When the shock is filled with gas, install back the
screw on top of the valve.
NOTE: Carefully inspect damper for gas or oil
leaks. Any leaks must be corrected before con-
tinuing.
276
mmr2005-140