Ski-Doo 2005 MACH Z, Руководство по ремонту, Страница: 188 / 343

Section 05 ELECTRICAL SYSTEM
Subsection 03 (STARTING SYSTEM)
If the starter turns, ensure wiring harness and con-
nectors between battery and starter are in good
condition. See procedure above.
If the starter does not turn, replace it.
STARTER REMOVAL
Disconnect BLACK (-) cable from battery then the
RED (+) cable.

WARNING
Always disconnect BLACK (-) cable first.
Remove tuned pipe.
Disconnect RED cable from starter.
Disconnect ground cable from starter.
Unbolt and remove starter from engine.
STARTER INSTALLATION
Use new teflon washers on the 3 bolts retaining
starter to engine.
Torque the bolts to 28 N•m (20 lbf•ft).
Connect the RED wire to the large terminal of the
starter.
Torque large terminal nut to 7 N•m (62 lbf• in ).
Connect ground cable to the starter with star
washer in between.
Torque ground cable connecting bolt to 11 N•m
(97 lbf•
in ).
Install battery cables.

WARNING
Always connect RED (+) cable first.
174
mmr2005-129