Simrad GN70, Руководство оператора и инструкция по установке

Страница: 7 / 100

| 7
Introduction | GN70/MX610/MX612 Operator and Installation Manual
Introduction
GN70/MX61x Front Panel and Keys
MOB
MENU
POS NAV HDG
AIS
USB
9 10 11
1 2 3
12
4
8
USB
14 12
13
6
7
5
PAGE
ENT
CLR
No. Description
1
PAGE
key: Brings up different screen page every time this key is pressed or to
change tab in the settings and tools menu.
2
MENU
key: Brings up the quick menu dialog box.
3
POWER/LIGHT
key
Short press will turn ON the unit.
Momentary press brings up the backlight and night view controls.
Series of short presses will cycle through 6 levels of display brilliance.
Long press will turn power off.
4
ROTARY KNOB:
Rotate to scroll through menu icons or numbers in the virtual
keypad. Press the center of the knob to select menu item or accept entry. Same entry
action when you press the
ENT
key.
5
CLR
key: Press to clear, escape or back out of the menu or data entry.
6
ENT
key: Press to accept menu selection or data entry. Same entry action when you
press the center of the rotary knob.
7
MOB
key: Short press will save the present position L/L into the next vacant
waypoint. Press and hold for 3 seconds will activate the Man-Over-Board (MOB)
function.
8
POS
hot key: Position page will display the present position Latitude, Longitude,
COG, SOG, Date and Time. Press repeatedly to show POS1, POS2 or POS3 pages.
9
NAV
hot key: Navigation page will display the navigation information.
Press repeatedly to show NAV1, NAV2 or NAV3 pages.
10
HDG
hot key: Heading page will show the compass rose, Pitch, ROT and Yaw
information coming from a gyro or a GPS compass. Press repeatedly to show HDG1
or HDG2 pages.
11
AIS
hot key: AIS page will display the PLOT screen showing your vessel, waypoints,
route and other navigation information. Will also show AIS targets when connected
to an AIS receiver via the NMEA 2000 network.
12
USB*
door: To open, lift the right tab and slide the cover to the right. To close, slide
cover to left and push the tab down. Close USB door at all times to prevent moisture
intrusion.
13
USB*
key: Press to view the files contained in the USB memory stick.
14
USB*
Connector
*) Not for GN70
1