Simrad GN70, Руководство оператора и инструкция по установке

Страница: 42 / 100

42 |
Waypoints, Routes & Tracks | GN70/MX610/MX612 Operator and Installation Manual
Tracks
A track is a graphical presentation of the historical path of the vessel, allowing you to retrace
where you have travelled.
From the factory, the system is set to automatically draw a track. The system will continue to
record the track until the track length reaches the maximum trail point setting, and will then
automatically begin overwriting the oldest track points.
The automatic tracking function can be turned off from the Tracks panel described later in
this section.
Creating a new track
You define the track settings and start the new track from the Tracks Settings dialog described
below.
Track settings
The track is made up of a series of track points connected by line segments whose length
depends on the frequency of track recording.
You can select to position track points based on time settings, distance, or by letting the GN70/
MX61x system position a waypoint automatically when a course change is registered.
¼
Note:
The Tracks option must also be turned ON in the chart settings to be visible.
Track setup
Use the procedure below to configure the track feature: .
1.
Press the
MENU
key.
2.
Scroll to Tracks, press the
ENT
key.
3.
Turn the knob to highlight the Logging type then press the knob.
4.
Select Auto, Distance or Time, press the
ENT
key.
5.
If selection is the Distance, to change follow instruction below:
• Highlight Distance, press
ENT
key
• On virtual keypad, enter numeric value for distance period. Use the arrows to navigate the
keypad. Range 000 to 115.07
6.
If selection is the Time, to change follow instruction below:
• Highlight Time, press
ENT
key
• Choose time interval (secs/mins) from menu list, turn rotary knob clockwise, highlight and
press rotary knob
7.
Press
CLR
key to escape.
To edit Track
Use to change track log
1.
Press the
MENU
key.
2.
Scroll to Wpt/Rte/Trk.
3.
Press the
ENT
key.
4.
Press the
PAGE
key to change the tab to Tracks.
5.
Scroll to the desired track.
6.
Press
MENU
key.
7.
In submenu, choose Edit option then press the
ENT
key.
8.
In Edit Track window, rotate knob and highlight fields to change.
9.
To change track name, highlight the name field, press rotary knob, use virtual keypad to enter
name.
10.
Highlight the
Enter
button in keypad when completed, then press the
ENT
key.
11.
To (remove) display or record track, (un)check the selection.
12.
Customize track display, rotate knob to graphic and press rotary knob, from grid select color
of track.