Simrad GN70, Руководство оператора и инструкция по установке

Страница: 11 / 100

| 11
Basic operation | GN70/MX610/MX612 Operator and Installation Manual
Basic operation
Light/Power key
•
Press and hold: Turn unit off
•
Single press:
To turn ON or display dialog for
light/night
mode adjustment
•
Repeated
presses: Toggle preset brightness levels
(10 - 6 - 3- 1)
•
Check box To switch to
night
mode operation
¼
Notes:
1.
The CDU goes through its boot-up routine as soon as external power is applied. It will be
ready to turn on in about 30 seconds. The succeeding turn on time will be instantaneous
thereafter as long as the external power is not disconnected.
2.
If the
POWER
key is released before shut-down is completed, the power off is cancelled.
Night mode
The
Night
mode optimizes the color palette for low light conditions. To activate, rotate the
knob until the
Night
mode check box is highlighted, then press the
ENT
key.
¼
Note:
Details on the display may be less visible during Day time when the
Night
mode is
selected!
The display backlight can be adjusted in two ways by using the rotary knob (10 steps) or by
pressing the
LIGHT/POWER
key repeatedly.
PAGE key
Select Pages
You can view the different main pages sequentially by pressing the
PAGE
key repeatedly.
You can also view the main pages directly by pressing the hot keys at the bottom of the
display. The
PAGE
key is also used to change tabs or toggle between the Tools and Settings
screens of the main menu.
2