Simrad GN70, Руководство оператора и инструкция по установке

Страница: 54 / 100

54 |
Alert system | GN70/MX610/MX612 Operator and Installation Manual
Alert system
The GN70/MX61x system continuously checks for dangerous situations and system faults
while the system is running. When an alert situation occurs, an alert message will pop up on
the screen and the status indicator on the top-right corner of the display will show the alert
icon.
Type of messages
There are two type of messages:
• Alerts
-
Generated when conditions are detected that critically effect the capability or
performance of the system.
You must critically examine all alert messages to determine their cause and effect.
• Warnings
-
Informing you of conditions that could result in unwanted system response or eventual
failure.
Alert indications
When an alert situation occurs, siren will sound, the alert icon will be active. The alert dialog
will show alert cause, followed by the name of the device that generated the alert.
Alert type Icon State Indication
Alarm
Active -
not acknowledged,
not silenced Flashing symbol and descriptive text
accompanied by 3 short audible signals
repeated every 8 seconds
Active -
not acknowledged,
silenced Flashing symbol and descriptive text
No audible signal
Active -
acknowledged Steady symbol and descriptive text
No audible signal
Rectified -
not acknowledged Flashing symbol and descriptive text
No audible signal
Warning
Active -
not acknowledged,
not silenced Flashing symbol and descriptive text
accompanied by 2 short audible signals
repeated every 1 min.
Active -
not acknowledged,
silenced Flashing symbol and descriptive text
No audible signal
Active -
acknowledged Steady symbol and descriptive text
No audible signal
Rectified -
not acknowledged Flashing symbol and descriptive text
No audible signal
The alert and alert details are recorded in the alert listing, see next page.
10