Simrad GN70, Руководство оператора и инструкция по установке

Страница: 15 / 100

| 15
Basic operation | GN70/MX610/MX612 Operator and Installation Manual
HDG page
There are two HDG pages available, namely: HDG1 and HDG2. Pressing the
HDG
key will
bring up the HDG1 page showing the full compass rose. Pressing the HDG key again will
show the HDG2 page showing the digital heading readout with ROT, pitch, roll and yaw.
This information will be displayed when a gyro, HS80/HS80A or MX575C/MX575D GPS
compass is available in the NMEA 2000 network or when they are connected to the MX61xJB
junction box.
AIS page
The AIS page is not certified for use on SOLAS ships.
Pressing the
AIS
key will therefore bring up a warning
page. After acknowledging, the plotter page will show
your ship in the middle of the screen, together with
waypoints, routes, and AIS targets if an AIS unit is available
in the NMEA 2000 network.
1 Instrument bar
Navigation data is contained on the bar on top of the
PLOT page. The PLOT is under the AIS key.
2 Plotter orientation
Possible orientation of the plotter is North Up or Course
Up.
3 Ship’s location
Always located in the middle of the plot screen.
1 2 3