Simrad GN70, Руководство оператора и инструкция по установке

Страница: 33 / 100

| 33
System Configuration | GN70MX610/MX612 Operator and Installation Manual
Multi-Hz feature
For navigation applications that require more than 1 position per second data output, the
GN70/MX61x can configure the GS70 antenna and the MX610JB junction box NMEA ports
to output the NMEA sentences up to 10 Hz. Use the setup procedure below to turn on the
multi-Hz output feature:
GS70 antenna setting:
1.
Press the
MENU
key.
2.
Select the Tools and Settings then press
ENT
.
3.
Highlight the GPS icon then press
ENT
.
4.
Select Advance configuration then press
ENT
.
5.
Select Position update rate then press
ENT
to bring up the drop-down submenu.
6.
Selection rates are 1, 5 or 10 Hz. Select desired speed then press
ENT
.
7.
Press the
CLR
button to go back to main menu.
GN70/MX61x port setting:
1.
Highlight the Network icon then press
ENT
.
2.
Scroll down to NMEA 0183 over junction box menu then press
ENT
. A drop-down list show-
ing the port numbers will be shown.
3.
Scroll to the port# you want to use (i.e. Port 1) then press
ENT
to bring up the list of NMEA
messages.
4.
Scroll to GGA then press
MENU
.
5.
Select 10 (for 10 Hz) then press
ENT
.
6.
Repeat the steps 11-12 for other NMEA sentences that you want to use.
7.
Press the
CLR
key or any hot keys to exit.
Determine the unit’s software version
The About screen displays the copyright information, wheelmark icon and other technical
information about the CDU model and MX antenna connected through the MX61xJB
junction box. For devices connected through the NMEA 2000 network, the software version
can be viewed using the device list.
CDU and Antenna software version:
1.
Press the
MENU
key.
2.
Scroll to Tools & Settings, press
ENT
.
3.
Scroll to Systems icon, press
ENT
.
4.
Scroll to About, press
ENT
. The system Model#, s/w version, Antenna model# and s/w version
will be indicated
5.
To exit, press the
CLR
key repeatedly or press any hot key.