SII IP-5520, Руководство пользователя

Страница: 180 / 252

4-26
7
Lift the wiper sponge little by little while
drawing it toward you. After confirming
that the liquid in the wiper sponge has
completely flowed in the printer, remove
the wiper sponge.
8
Install a new wiper sponge.
Insert it as far as it goes until it clicks.
9
Install a new wiper cleaning liquid bottle.
(
P.4-23[Wiper cleaning liquid replacement]
)
10
Close the cap cover and the front over.
11
Select [*YES] with key and press
key to finish.
Note
- The printer automatically calculates
the wiper sponge usage time and
displays the message prompting to
replace the wiper sponge when necessary. If a new wiper sponge is installed
and [*YES] is set, the counted value is reset. Reset the count only when
necessary to avoid replacement time calculation errors.
#REPLACE FINISHED
*
NO
#REPLACE FINISHED
* YES