SII IP-5520, Руководство пользователя

Страница: 179 / 252

M
ain
te
na
nc
e a
nd A
dju
stm
en
t / R
ep
la
ce
m
en
t
4-25
4
This section describes the wiper sponge replacement procedure.
Replace the wiper sponge when the printer displays the replacement message.
The wiper sponge needs replacement about once every six months as a general rule.
1
Set the printer to offline. Press key
to display PH.MAIN MENU.
2
Press key to enter the PH.MAIN MENU.
The cap cleaning menu is displayed.
3
Select [REPLACE WIPE SPONGE] with
key and press key.
4
When the confirmation menu appears,
press key.
5
Open the front cover and the cap cover.
6
Raise up the wiper cleaning liquid bottle a
little and pull out the bottle after making
sure that all the liquid has flowed into the
printer.
Note
- Visually check that the waste ink bottle
is not full before removing.
Wiper sponge replacement
h
REWIND FORM FEED
i
f
PH.REC PH.MAIN
g
#CAP CLEANING
>
#REPLACE WIPE SPONGE
>
#REPLACE WIPE SPONGE
* OK ?
2
1
OPEN COVER
REPLACE WIPE SPONGE
REPLACE WIPE SPONGE
CLOSE COVER