SII IP-5520, Руководство пользователя

Страница: 181 / 252

M
ain
te
na
nc
e a
nd A
dju
stm
en
t / R
ep
la
ce
m
en
t
4-27
4
Media advance value setting
The media advance characteristics vary depending on the thickness, elasticity
and surface frictional resistance of the media. If the media advance value is
not appropriate, banding (horizontal stripes) may appear on the print. Use the
following procedure to set the appropriate media advance value.
The following factors affect the media advance value:
- Type of media
- Print mode
- Smart pass setting
- Pressure change using the pressure roller up/down lever
- Use of the take-up reel unit
- Media advance mode (FWD ONLY/BACK & FWD)
Media advance value setting procedure
1
Set media wider than A1 size in width and longer than 1 m in length.
The media advance value can be determine using both the single and the multi
advance adjustment patterns.
With SING. ADV, printing is performed with the current ADJ VALUE (one pattern).
With MULTI ADV, printing is performed with the current ADJ VALUE - 0.2%, the
current ADJ VALUE and the with the current ADJ VALUE + 0.2% (3 patterns).
When the take-up reel unit is set to the tension winding, the print length
becomes longer.
(To stop the printing of the advance adjustment pattern, press
key.)
With single pattern
2
Set the printer to offline.
(Press key.)
3
Press key to display SING. ADV.
h INK MEDIA REG i
f MEDIA M.ADV g
Step 1
Step 2
Reading the print result of the
adjustment pattern, Print the adjustment pattern
Enter the media advance value.
# SING. ADV
#EXECUTE>