SII IP-5520, Руководство пользователя

Страница: 243 / 252

6-19
Tro
ub
le
sh
oo
tin
g
6
[ Cause ]
The ink dries slowly / Too
much ink
Basic image [ Cause ]
Shift of the print head
position / Shift of the print
head bidirection position
q How to get good image quality
Bleeding on the print
Possible cause Solution
The ink dries slowly / Too
much ink
(1) Raise the heater temperature. ( P.2-25)
(2) Set SMART PASS to MEDIUM or HIGH before printing.
( P.3-25)
(3) Print with print mode set to HIGH QUALITY or MAX QUALITY
( P.3-24)
(4) If the print density was set to HIGH DENSITY, change it to
NORMAL
( P.3-26)
(5) If the print was performed in bidirectional mode, change to
unidirectional print mode
( P.3-27)
Shift in the print head
position / Shift in the print
head bidirectional position (1) Adjust the print head position. ( P.4-38)
(2) Adjust the bidirection position of the print head.
( P.4-33)
Print misses appear when printing starts
Possible cause Solution
Out of the operating
temperature and humidity
range Use the printer within the operating temperature and humidity
range.
( P.1-3)