SII IP-5520, Руководство пользователя

Страница: 240 / 252

6-16
Possible cause Solution
The media advance is not
properly adjusted
- [Suggestions for media
advance value]( P.6-22)
(1) Set SMART PASS to MEDIUM or HIGH before printing.
( P.3-25)
(2) Print the media advance adjustment pattern and adjust the
media advance value.
( P.4-27)
(3) Change the pressure force using the pressure roller up/down
lever.
( P.2-20)
(4) Print the media advance adjustment pattern again and adjust
the media advance value. ( P.4-27)
(5) Print in the unidirectional print mode. ( P.3-27)
(6) Print with print mode set to HIGH QUALITY or MAX QUALITY.
( P.3-24)
Print miss (1) Check that there is no dust or particles on the platen, and
remove them if necessary.
( P.4-15)
(2) Perform the regular maintenance.
( P.4-3)
(3) Perform a print head cleaning (NORMAL).
( P.4-19)
After this, run the nozzle print and confirm that the print miss
problem is solved.
( P.4-8)
(4) Clean the surface of the print heads. ( P.6-23)
After this, run the nozzle print and confirm that the print miss
problem is solved.
( P.4-8)
- By adding the color stripe when printing, the
incidence of print miss is reduced. ( P.3-
32)
The media is not well
adapted / The ink dries fast.
(1) Print the media advance adjustment pattern and adjust the
media advance value. ( P.4-27)
- [Suggestions for media advance value]
( P.6-22)
(2) Decrease the heater temperature.
( P.2-25)
(3) Print with print mode set to HIGH QUALITY or MAX QUALITY
( P.3-24)
(4) Print in the unidirectional print mode. ( P.3-27)
(5) Print with density set to HIGH DENSITY ( P.3-26)
(6) Print using a known media with good performance.
Print irregularities (1) Use a different media. ( P.2-7)