SII IP-5520, Руководство пользователя

Страница: 122 / 252

3-30
(12) LEADING EDGE
Detects the edge of the media when replac-
ing or setting the media, and selects whether
the media should be returned to the waiting
position. When the take-up reel unit is used,
the media will not be returned to the waiting
position regardless of this setting.
<Parameter (selection)>
NORMAL Detects the media width when replacing or setting the media,
and then completes the media setting after checking media
skew during media feeding.
DEDUCED Detects the media width when replacing or setting the media
and then completes the media setting after detecting the
edge of the media during media rewinding.
Note
- Usually set [NORMAL]. When selecting [REDUCED,] take care of the followings.
- Cut the edge of the media so that the edge of the media is parallel to the
platen and set it to the printer. If the edge of the media is not parallel, it
may cause print defects on the leading edge of the media, the platen to be
stained by ink and media jams.
- Set the media after checking that there is no tape or glue on the edge of the
media. Using such media may cause media jams.
(13) SUCTION FAN LEVEL
Select the force (speed of fan) to draw the
media to the platen.
<Parameter (selection)>
NORMAL Draws the media by normal amount of force.
LOW Draws the media with less than normal amount of force.
Note
- With very soft media like clothes, select [LOW] when wrinkles appear.
- When [LOW] is selected, the airflow of the blower unit (option) also becomes
low.
#LEADING EDGE
>XX:NORMAL
#SUCTION FAN LEVEL
>XX:NORMAL
XX : Selected media number
XX : Selected media number