SIGRIST ColorPlus 2 Скачать руководство пользователя страница 7

Страница: 7 / 112

General user information

Instruction Manual ColorPlus 2

13045E/3

1.12

Dangers when not used properly

DANGER!

Operation when not used properly.

Improper use of the instrument can cause injuries to persons, process-related consequential
damage and damage to the instrument and its peripherals.

In the following cases the manufacturer cannot guarantee the protection of persons and the
instrument and therefore assumes no legal responsibility:



The instrument is used in a way not included in the described area of application.



The instrument is not properly mounted, set up or transported.



The instrument is not installed and operated in accordance with the Instruction Manual.



The instrument has been operated with accessory parts which SIGRIST-PHOTOMETER
AG has not expressly recommended.



Improper changes to the instrument have been performed.



The instrument has not been operated within the specifications, in particular concerning
pressure and temperature.



The instrument is exposed to vibrations, shocks or other mechanical forces.

Содержание ColorPlus 2

















































































































Результаты поиска

Содержание ColorPlus 2

Отзывы:

Похожие инструкции для ColorPlus 2

Бренды по названию

Популярные бренды

SIGRIST ColorPlus 2, Инструкция по эксплуатации

Результаты поиска

Содержание ColorPlus 2

Отзывы:

Похожие инструкции для ColorPlus 2

Бренды по названию

Популярные бренды