Instruction Manual ColorPlus 2
Settings
68
13045E/3
8.3
Setting the limits
The limits have to be configured accordingly so that they are not only displayed, but that the
outputs are also switched. Section 8.4
MANIPULATION
ADDITIONAL INFO / IMAGES
1.
Press the
Menu
button.
2.
Enter the access code and confirm with
OK
.
Factory setting is
0
.
3.
Press the
Limits
button.
If the desired menu does not
appear, press the arrow at the bot-
tom right.
4.
Select between
L1 .. n
.
5.
Select the source.
The following selection is available:
C1 .. n (measuring channels)
M1 .. 3 (math channels)
A1 .. 2 (analog channels)
Humidity
6.
Define the
Mode
.
The following selection is available:
Inactive
(limit monitoring of
this channel is deactivated)
Exceeded
(limit active when
the set threshold value is ex-
ceeded)
Undershot.
(limit active when
the set threshold value is under-
shot)
7.
Define the upper limit, lower limit, cut-in delay
and cut-out delay with the number pad.
Pressing the current number
value takes you to the entry mode.
8.
Press the
Meas
button.
The instrument is in measuring
mode again.
