Instruction Manual AquaScat 2 P
Packaging & transport
62
11838E/2
12.
Packaging & transport
The original packaging materials of the photometer should be used for packaging the pho-
tometer and its peripheral components if possible. If the original packa ging is no longer
available, note the following information:
Before packaging, close the openings of the photometer with adhesive tape or plugs
so that no packaging materials can enter the instrument.
The photometer contains optical and electronic components. Make sure that the
packaging protects the instrument from being damaged by impact during transport.
All peripheral devices and accessory parts must be packaged separately and marked
with device numbers (
Section 2.2). This prevents confusion and mix-ups later while
also making it easier to identify parts.
When sending for repairs, ensure that the complete instrument (checking unit if pre-
sent) is sent.
When packaged in the way described above, the instruments can be transported by the us u-
al shipping methods and in all positions .
