Instruction Manual AquaScat 2 P
Mounting the measuring device
12
11838E/2
4.
Mounting the measuring device
4.1.
Location evaluation
A note about selecting the right installation location:
The sample feed should be as short as possible so that changes in the reading are
displayed without delay.
There should be no vibrations on the mounting surface. Vibrations cause measuring
errors and can permanently damage the unit.
The photometer and peripheral equipment should be easily accessible to facilitate i n-
spection and maintenance work.
Make sure that the photometer is not exposed to direct sunlight. This may cause sig-
nificant deviations in the measuring value.
4.2.
Mechanical mounting of the photometer
Figure 3: Mounting the AquaScat 2 P
Fastening on the photometer
Mounting bracket on the wall
Support
Fixing nut
The dimensional specifications according to the mounting drawings in the Appendix must be
observed when mounting the photometer.
Section 15
