Mounting the measuring device
Instruction Manual AquaScat 2 P
11838E/2
15
4.4.2.
Attaching the sample connections
Figure 4: Inlet and outlet of the photometer
Sample inlet
Sample outlet
The inlet hose is fastened to the sample inlet (Figure 4, 1) and the drain hose is fastened to
the sample outlet (Figure 4, 2).
4.5.
Mounting the optional flow meter
Note the following when connecting the optional accessory part:
All hose junctions have to be secured with hose clamps. The sealing of the junctions should
be checked about 2 weeks after installation to ensure that no air can be pulled in.
SIGRIST recommends installing a simple flow meter to regularly check the sample flow .
Sections 2.1 and 2.3
Note the following points when mounting the flow meter:
The flow meter is to be fastened before the sample inlet of the photometer.
If the required water flow rate is exceeded or undershot, measuring errors may occur!
Installing a flow meter with limit contact improves this situation.
CAUTION!
