Instruction Manual AquaScat 2 P
Servicing
50
11838E/2
WORKSTEP
PROCEDURE
3.2: Mount the checking unit (Figure 20, 1) onto the
measuring cell plate (Figure 20, 4) as follows.
1. Align the groove (D) to the pin (C).
2. Press and hold the release device (A) and guide the
checking unit onto the cam (B).
3. Release the release device (A).
3.3: Re-insert the measuring cell plate (Figure 20, 4)
with the mounted checking unit into the measuring
cell housing and fasten the with the screw cap (Figure
20, 3).
When doing so, ensure that the pin (E) is aligned to
the groove (F).
