Decommissioning & storage
Instruction Manual AquaScat 2 P
11838E/2
61
11.
Decommissioning & storage
Life threatening voltage inside the instrument:
Connecting the electrical lines is extremely dangerous. Parts of the system can also be dam-
aged. Local regulations must be observed at all times for electrical installations.
The aim of decommissioning is to prepare the instrument properly for storage and to con-
serve it during storage.
WORKSTEP
REMARKS
1.
Life threatening voltage inside the instru-
ment:
Connecting the electrical lines is extremely dangerous.
Parts of the system can also be damaged. Local regu-
lations must be observed at all times for electrical in-
stallations.
Interrupt the service voltage to the photometer and
remove electrical connections.
2.
Interrupt the sample feeding and remove the inlet
hose and drain hose.
3.
All surfaces which come into contact with the sample
must be thoroughly cleaned.
4.
Remove the photometer from the measuring station.
5.
Make sure that all covers are closed and all locks on
the instrument are locked.
There are no special requirements for storing the instruments. However, please note the fol-
lowing information:
The photometer contains electronic components. Storage for such components must
fulfill the usual conditions. It is important to ensure that the storage temperature is
between -20 and +50
℃
.
All components that come into contact with the sample during operation have to be
dry and clean for a longer period of time before being put into storage.
The photometer and accessory parts must be protected from weather factors, con-
densing humidity, and aggressive gases.
DANGER!
Storage
