Instruction Manual AquaScat 2 P
Operation
40
11838E/2
7.11.
Setting the outputs (relay outputs 1/2)
Outputs 1/2 are located on the base print of the customer connection terminals and are de s-
ignated as relays 1/2.
Section 5.3
MANIPULATION
SUPPLEMENTARY INFORMATION
1.
Press the
Menu
button.
2.
Set the access code and confirm with
OK
.
Factory setting is
0
.
3.
Press the
Inp./outputs
button.
4.
Press the
Outputs
button.
5.
Select
Output 1/2
button.
6.
Activate output functions (multiple selection
possible). When completed press
OK.
Activated output functions are high-
lighted green
Invert: inverts the outputs
Prio fault
Fault
Warning
Service
Adjustment
Limit 1/2
The functions marked with MR refer to
automatic measuring range switching
and are described in the Reference
Manual.
7.
Press the
Meas
button.
Instrument again in measuring opera-
tion.