Siemens SiPass Entro Скачать руководство пользователя страница 63

Страница: 63 / 74

Using the system

Building Technologies

052_SiPass_Entro_6_5_A24205-A335-B318_e_en

Fire Safety & Security Products

10.03.2010

24.6.3

Reset door to normal state

To reset to normal mode again before the requested time - proceed as follows:

When unlocked

Dependant if the command A18, A19 or A20 have been used when unlocking the

door, different card holders can reset the door.



Use the card (+ PIN) in the same reader or use the Toggle reset from PC in the

Door monitor program.



The door is locked and set to normal mode.

When group code

Press A21 and use the same card (+ PIN) in the same reader

Press 0000.

Press 0000 once again



The door is locked and set to normal mode.

24.7

Quick search of card holders

There are several ways to search card holders (persons) in the database. As long

as the naming is consequent (e g first name first), it is easy the find the person you

want.

With initial character

If the person window is active, a single letter will position the cursor to the first card

holder starting with that letter. The search is done from left to right. All card holders

will still be visible.

With quick search field

In the quick search field several characters can be entered (from left) and only the

card holders that match are displayed. The filtering reduces the list dynamically

when more search characters are entered.
The filtering remains until you switch to another tab and go back – or end.

With enrolment reader

If an USB-RIF/2 reader interface (and a reader) is installed at the computer, a card

can be presented for the reader. The system will directly display the card holders’

properties.

Содержание SiPass Entro











































































Результаты поиска

Содержание SiPass Entro

Отзывы:

Siemens SiPass Entro, Руководство по эксплуатации, Страница: 63 / 74

Результаты поиска

Содержание SiPass Entro

Отзывы: