Siemens SiPass Entro Скачать руководство пользователя страница 49

Страница: 49 / 74

Door and event monitor

Building Technologies

052_SiPass_Entro_6_5_A24205-A335-B318_e_en

Fire Safety & Security Products

10.03.2010

20.4.3

Manually recording

In the Installer program you may have configured that an automatic recording shall

be performed.
You can also perform a manual start and stop of a recording. Note that you of

course must keep track of the duration manually. Also remember that this

command uses the settings (like frame rate) in the DVR. Be careful – this

command can generate large files in the DVR.
Proceed like this:
1.

Select a camera icon in a

Door monitor.

Right-click and select Start recording. The camera will now store images on the

DVR.

Abort the recording by right-clicking again and select Stop recording.

This will generate an event which then can be viewed with an event log command.

20.4.4

View recordings in the event log

Normally you use the event log in the Door monitor to find and replay recordings

triggered by the SiPass Entro application.
If e g a door has been forced, this event may generate an alarm event that both

sends a hardware signal (IOR6) and triggers a recording.
In the event log an image sequence is indicated by an icon in front of the event.

Recording started or finished. Clicking on the icon will normally replay the
sequence.
But when clicking on it during recording will instead start a start Live view.

No recording from camera.

Proceed like this:
1.

Select by scrolling (or searching) the event log for an event with a camera

symbol.

Double-clicking on the event and the recording will be displayed in a new

window (in the DVR Viewer).



Depending of the DVR in use, different command options may further be

used by right-clicking in the viewer window.

Perform any required actions.

Exit the viewer window.

Remember that if the event window in SiPass Entro indicates that an image

sequence has been recorded but then separately deleted in the DVR, an “empty”

window will be seen.

Содержание SiPass Entro











































































Результаты поиска

Содержание SiPass Entro

Отзывы:

Siemens SiPass Entro, Руководство по эксплуатации, Страница: 49 / 74

Результаты поиска

Содержание SiPass Entro

Отзывы: