Using the system
59
Building Technologies
052_SiPass_Entro_6_5_A24205-A335-B318_e_en
Fire Safety & Security Products
10.03.2010
24
Using the system
In this section the functions of SiPass Entro are described from the viewpoint of a
person entering the building. How do you get in? How do you set an intrusion
alarm?
24.1
Entrance
People entering the building can open a door in several different ways, depending
on the security level:
By using their card at the card reader of a door terminal.
By using their card at a card reader.
By entering a group code at a card reader or a PIN reader.
By using their card and entering the PIN at a card reader.
If the card/code is accepted, the green LED is lit and the lock is opened.
If the person entering the door enters the wrong PIN three times in succession, the
card will be blacklisted and must be re-validated at the PC. To indicate that a card
is blacklisted for this reason, two asterisks (**) are displayed in front of the person’s
name on the Persons tab in SiPass Entro. Double click the person’s name to
withdraw the cancellation.
The red LED (if it exists) on the reader can indicate in two ways that the alarm is
activated.
- Either permanently on all readers in the zone.
- For a certain time and only on the reader where the command is performed. All
other methods do not turn on the LED at all.
24.2
Arm and disarm an intrusion alarm system
To be able to arm and disarm an intrusion alarm system, the person must be a
member of an access group with authorization to arm and disarm intrusion alarms.
Certain access groups can have authorization to arm an intrusion alarm only,
while other access groups may only be allowed to disarm an intrusion alarm.
System users with
all rights also can arm and disarm an intrusion alarm via the
icons in the Door Monitor application.
Arm an intrusion alarm system – with a card
1.
Press B on a door terminal.
2.
Use the card through the reader and enter your PIN (depends on the current
security level).
The alarm is armed.