manualshive.com logo in svg

Siemens SiPass Entro, Руководство по эксплуатации, Страница: 62 / 74

Поделиться
Скачать
Siemens SiPass Entro Скачать руководство пользователя страница 62

Using the system 

62 
Building Technologies 

052_SiPass_Entro_6_5_A24205-A335-B318_e_en

Fire Safety & Security Products 

 

10.03.2010

 

Only caretakers can reset any common alarm 

at a reader keypad. 

 

24.6

 

Caretaker functions 

Some doors can be configured to allow for a temporary change of security level. 

The door can be set Unlocked for certain times - or set to Group code (4 digits). 

The command is invoked at - and applies only to – a selected door. 
The prerequisite is that the person doing this must belong to an access group with 

the Caretaker tick box selected. 

24.6.1

 

Unlocked 

There are three different commands for a Caretaker to unlock the door. 

 

A18 All caretakers can then reset/lock the door. 

 

A19 Only the very same caretaker

 can then reset/lock the door. 

 

A20 All authorized card holders can then reset/lock the door. 

Proceed as follows: 
1.

 

Press A18, A19 or A20 and the yellow LED flashes three times.  

2.

 

Use the card (+ PIN). 

 

The yellow LED is lit. 

3.

 

Enter the time when the door is to be locked again. E g 1600 for 4 PM. 

 

The reader sets the door unlocked until the requested time (or a time zone 

change). 

24.6.2

 

Group code 

Proceed as follows: 
1.

 

Press A21 and the yellow LED flashes three times. 

2.

 

Use the card (+ PIN). The yellow LED is lit. 

3.

 

Enter the time when the door is to be locked again. E g 1600 for 4 PM. 

4.

 

Enter the group code with four digits (not 0000).  

 

The yellow LED flashes once and the group code will work until the requested 

time (or a time zone change). Remote opening from PC will still work. 

Содержание SiPass Entro











































































Отзывы:

Нет отзывов