Siemens SiPass Entro Скачать руководство пользователя страница 41

Страница: 41 / 74

Event and door filters

Building Technologies

052_SiPass_Entro_6_5_A24205-A335-B318_e_en

Fire Safety & Security Products

10.03.2010

Event and door filters

Event and door filters are used in different ways in the SiPass Entro environment:



To control common alarm outputs in the IOR6 (and alarm dialog pop-ups on

the screen)



Reduce the amount of events stored on hard disk.



Control which events and door symbols to be displayed on the screen for a

particular System user.



Searching in the event archive.

Normally the system uses a standard event filter with recommended settings and

displays all doors graphically on the connected PC. You do not need to change

anything.
The screen shot below shows a typical setting for the door monitor type of events.

Event and door filter settings

17.1

Decide on name for new event filter

In every place in the software where you can/should select a filter you can create,

edit and store your filter settings (to be able to re-use them). You can create a

maximum of 32 event different filters.
You can change filter settings – and then name it and save it. As follows:
1.

Click on the icon beside the list box. Then choose New filter.

The Event filtering window is displayed. Enter the name for the new filter.

For each Event group, choose which events are to be reported.

Click the text, e.g. Valid access, to view the events belonging to this Event

group. Then filter the events.

Содержание SiPass Entro











































































Результаты поиска

Содержание SiPass Entro

Отзывы:

Похожие инструкции для SiPass Entro

Бренды по названию

Популярные бренды

Siemens SiPass Entro, Руководство по эксплуатации

Результаты поиска

Содержание SiPass Entro

Отзывы:

Похожие инструкции для SiPass Entro

Бренды по названию

Популярные бренды