Siemens Simatic RTU3030C, Руководство по эксплуатации

Страница: 106 / 392

Configuration (WBM)
4.7 User data for the first login to the WBM
RTU303xC
106
Operating Instructions, 06/2019, C79000-G8976-C382-06
4.7 User data for the first login to the WBM
Standard user data
In the factory the following login data is set as default.
Note
With the following user data you can log in the first time to the WBM.
User data Default values set in the factory
User name admin
Password admin
Note
Changing standard user data
For security reasons, the factory set default password of the standard user must be changed
when you log in the first time.
For security reasons, it is recommended that you create another user after the first login.
You will find the description in the section User (Page 161).
Loss of changed standard user data
Note changed or newly assigned user names and passwords.
If you change user data of the standard user, lose the changed user data and have not
created a second user, you no longer have access to the WBM of the RTU. In this case, you
can only access the WBM of the RTU after resetting to the factory settings. When you reset
the configuration data is lost.