SIJECT
OP15B
Screens
SIJECT 15/16 Operation Manual
3-27
Motor shut-down when alarm occurs (Motor Shut)
－
When there is
alarm, the time passing by from alarm occurring to motor shut. Range:
30~999s.
Heat off when alarm occurs (Heat Off)
－
Select
Heat On
or
Heat Off
when there is alarm.
Tolerance when ejector retract (EjeRetTol)
－
When using linear
scale, users can set the tolerance of ejector retract. Range: 0.1
～
9.9
mm.
Tolerance when mold open (MldOpnTol)
－
Set the tolerance of mold
open. Range: 1.0
～
99.9 mm.
Special parameter 3 (SpecPar 3)
－
Spare.
Special parameter 4 (SpecPar 4)
－
Spare.
Example
Select Position at Carriage retract mode (CarRetMod).
1. Press
or
key to move the cursor to carriage retract
mode field;
2. Press
key to start the setting mode;
3. Press
or
key to select “Position” mode;
4. Confirm the setting with “Enter” key;
Fig 3-23
Service screen 2 – linear scale setting
Linear scale setting
Press soft key F2
to enter the next service screen
，
see Fig. 3-23
Service screen 2 --- linear scale setting.
