Introduction
SIJECT 15/16 Operation Manual June, 2003
1-6
Working process of injection molding machine
General
The most important components in the injection molding machine are:
—
Injection unit
—
Mold close unit
—
Electrical and hydraulic control
Fig.
1-2
Injection
molding
machine
SIJECT 15/16
Siject 15/16 is a compact control system. It can be widely used to control
injection molding machine from low end to middle and high end
customer. It is a series product and consists of different versions, i.e.
SIJECT 15
+
, SIJECT 16, SIJECT 16 international and SIJECT 16DP
international version.
Please see the manufacturer documentation “
SIJECT 15/16 Start-up
”
for detailed information.
Control process
The configuration of individual injection molding machine can be
different, but the working process should be implemented in a similar
way. Thus we describe it roughly in the following diagram.
It is provided in the diagram that the Core-in acts before Mold Close Start
or during Mold Close Process, the Core-out acts before Mold Open Start
or during Mold Open Process.
!
Caution
Other functions not described in the following diagram might be executed
in the control system. It is only available for reference.
