SIJECT OP15B Screens
SIJECT 15/16 Operation Manual June, 2003
3-4
Element Indicator
Meaning
Timing screen
：
Display every set value and actual value of
timing.
Counter screen
：
Display the set value of part count, and the actual
production quantity of this power on.
Function screen
：
Select language, adjust the brightness and set
the back light function.
Load/save screen
：
Load/ save mold number and parameters to/from
CI or MMC card.
Data screen
：
Display the position and time during the latest 10
injections and cycles.
Service screen
：
Display the service information for OEM, such as
linear scale, proportional valve, password, etc.
Mold open/close screen:
Set the process parameters for 3 mold
open/close modes.
Ejector setting screen:
Set the process parameters for 3 ejector
advance/retract modes, and ejector mode.
Carriage setting screen:
Set the process parameters for carriage
advance/retract, and charging mode.
Injection setting screen:
Set the process parameters for 4 injection modes/
3 pressure holding modes, and switch mode.
Charging setting screen:
Set the process parameters for 4 charging
modes, and back pressure selection.
Core 1 setting screen:
Set process parameters for core 1, and select
core 3.
Core 2 setting screen:
Set process parameters for core 2, and select
core 3.
Air blow setting screen:
Set parameters for air blow 1 / 2 .
