SIJECT
OP15B
Screens
SIJECT 15/16 Operation Manual
3-7
Displaying field:
（
1
）
when one small square indicator becomes light on, it means the
machine is working at the indicated step.
（
2
）
when a parameter block is not backlighting, it means this block
is allowed to be set; if a block is backlighting, then this block is
parameter displaying.
（
3
）
if the screen with cursor function selection, it is requested to
use the cursor first. Move the cursor to the wanted item, and
press the Selection key
. Then press cursor up or down
key to select the function and use “Enter” key to confirm the
setting.
（
4
）
for the basic operating pictures, it is necessary to enter
password 1 to set parameters for the first power-on; or, after 5
minutes, users should input password 1 for the second time to
carry out parameters operation. For service picture (OEM),
password 2 must be input. Refer to section 3.1.10 “Service
screen” for password setting and changing.
