SIJECT® Documentation
Key to editions
The editions listed below have been published prior to the current edition.
The column headed "Note" lists the amended sections, with reference to the previous edition.
Marking of edition in the "Note" column:
A ....
New documentation.
B ....
Unchanged reprint with new order number
C ....
Revised edition of new issue.
If any technical details presented on one of these pages have been changed with reference to
the previous edition, it is indicated by another edition number in the header of the respective
page.
Edition
12.2000
06.2001
07.2002
06.2003
Order No.
6AT1931-5AB41-0KA0
6AT1931-5AB41-0KA0
6AT1931-5AB41-0KA1
Remark
A
C
A
Tested Siemens quality for software and training to
DIN ISO 9001, Reg. No. 2160-01
This publication was made with WinWord V 7
and Designer V 6.0
Passing on and reproduction of this document, and utilization and disclosure of its
contents is not allowed unless specifically authorized.
Violations shall be cause for damage liability. All rights reserved, particularly in the
event a patent is issued or a utility model patent is registered.
© Siemens AG 2003. All Rights Reserved.
Other functions which are not described in this Documentation can possibly also
be performed on the control system. However, the customer is not entitled to
demand these functions when new equipment is supplied or servicing is carried
out.
Although we have checked the contents of this publication for agreement with the
hardware and software described, we do not accept liability for total agreement
since differences cannot be totally ruled out. The information in this publication is
checked at regular intervals and necessary correction included in the next release.
Suggestions are welcome.
Subject to change without prior notice.
Order No.
Printed in People’s Republic of China
Siemens-Aktiengesellschaft.
