Siemens RUGGEDCOM ROX II Скачать руководство пользователя

Страница: 689 / 798

RUGGEDCOM ROX II

CLI User Guide

Chapter 14

Network Redundancy

Configuring STP Globally

643

Parameter

Description

The Rapid Spanning Tree Protocol (RSTP) standard does not address network security.

RSTP must process every received Bridge Protocol Data Unit (BPDU) and take an

appropriate action. This opens a way for an attacker to influence RSTP topology by

injecting RSTP BPDUs into the network. BPDU Guard is a feature that protects the

network from BPDUs received by a port where RSTP-capable devices are not expected

to be attached. If a BPDU is received by a port for which the 'Edge' parameter is set to

'TRUE' or RSTP is disabled, the port will be shut down for the time period specified by this

parameter.
• NO SHUTDOWN: BPDU Guard is disabled.
• UNTIL RESET: The port will remain shut down until the port reset command is issued by

the user.

• SPECIFY: A timeout period is specified for the port using the BPDU Timeout parameter.

bpdu-timeout { bpdu-timeout }

Synopsis:

A 32-bit unsigned integer between 1 and 86400

The time for which a port is shutdown. Only applicable when BPDU Guard Mode is set to

specify

fast-root-failover { fast-root-failover }

Synopsis:

{ on, off, on-with-standard-root }

Default:

The Fast Root Failover algorithm. Options include:
• Off: The Fast Root Failover algorithm is disabled. As such, a root switch failure may

result in excessive connectivity recovery time in a mesh network.

• On: Fast Root Failover is enabled and the most robust algorithm is used, which

restores network connectivity quickly in case of root bridge failure in a mesh network.

• On with standard root: Fast Root Failover is enabled but a relaxed algorithm is used,

allowing the use of a standard switch in the root role.

dot1w-interop

Synopsis:

{ true, false }

Default:

true

Enables/disables IEEE 802.1w Interoperability

cost-style { cost-style }

Synopsis:

{ stp, rstp }

Default:

stp

The style of link costs to employ. STP uses 16-bit path costs based upon 1x10E9/link

speed (4 for 1Gbps, 19 for 100 Mbps and 100 for 10 Mbps) whereas RSTP uses 32-bit

costs based upon 2x10E13/link speed (20,000 for 1Gbps, 200,000 for 100 Mbps and

2,000,000 for 10 Mbps). Note that RSTP link costs are used only when the bridge version

support is set to allow RSTP and the port does not migrate to the Spanning Tree Protocol

(STP).

5. Configure the RSTP instance settings by configuring the following parameter(s):

Parameter

Description

bridge-priority { bridge-priority }

Synopsis:

{ 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864,

40960, 45056, 49152, 53248, 57344, 61440 }

Default:

32768

The priority assigned to the RSTP/Common Bridge Instance.

6. If necessary, add Multiple Spanning Tree Instances (MSTI). For more information, refer to

Section 14.3.6.3,

“Adding a Multiple Spanning Tree Instance”

7. Type

commit

and press

Enter

to save the changes, or type

revert

and press

Enter

to abort.

Содержание RUGGEDCOM ROX II































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RUGGEDCOM ROX II

Отзывы:

Похожие инструкции для RUGGEDCOM ROX II

Бренды по названию

Популярные бренды

Siemens RUGGEDCOM ROX II, Руководство пользователя

Результаты поиска

Содержание RUGGEDCOM ROX II

Отзывы:

Похожие инструкции для RUGGEDCOM ROX II

Бренды по названию

Популярные бренды