Siemens RUGGEDCOM ROX II Скачать руководство пользователя

Страница: 700 / 798

Chapter 14

Network Redundancy

RUGGEDCOM ROX II

CLI User Guide

654

Viewing the Status of RSTP

Parameter

Description

regional-root-mac

Synopsis:

A string 17 characters long

The bridge identifier of the Internal Spanning Tree (IST) regional root bridge for the Multiple

Spanning Tree (MST) region this device belongs to.
This parameter is mandatory.

root-port-slot

Synopsis:

{ { --- }{ sm, lm1, lm2, lm3, lm4, lm5, lm6, swport, eth, serport, celport,

wlanport }{ trnk } }
If the bridge is designated, this is the slot containing the port that provides connectivity

towards the root bridge of the network.
This parameter is mandatory.

root-port-port

Synopsis:

A 32-bit signed integer

If the bridge is designated, this is the port of the slot that provides connectivity towards the

root bridge of the network.
This parameter is mandatory.

root-path-cost

Synopsis:

A 32-bit unsigned integer

The total cost of the path to the root bridge, composed of the sum of the costs of each link

in the path. If custom costs have not been configured. 1Gbps ports will contribute a cost

of four, 100 Mbps ports will contribute 19 and 10 Mbps ports will contribute 100. For the

Common and Internal Spanning Tree (CIST) instance of the Multiple Spanning Tree Protocol

(MSTP), this is an external root path cost, which is the cost of the path from the Internal

Spanning Tree (IST) root (i.e. regional root) bridge to the Common Spanning Tree (CST) root

(i.e. network "global" root) bridge.
This parameter is mandatory.

regional-root-path-cost

Synopsis:

A 32-bit unsigned integer

For the Common and Internal Spanning Tree (CIST) instance of the Multiple Spanning Tree

Protocol (MSTP), this is the cost of the path to the Internal Spanning Tree (IST) root (i.e.

regional root) bridge
This parameter is mandatory.

configured-hello-time

Synopsis:

A 32-bit signed integer

The configured hello time from the Bridge RSTP Parameters menu.
This parameter is mandatory.

learned-hello-time

Synopsis:

A 32-bit signed integer

The actual hello time provided by the root bridge as learned in configuration messages. This

time is used in designated bridges.
This parameter is mandatory.

configured-forward-delay

Synopsis:

A 32-bit signed integer

The configured forward delay time from the Bridge RSTP Parameters menu.
This parameter is mandatory.

learned-forward-delay

Synopsis:

A 32-bit signed integer

The actual forward delay time provided by the root bridge as learned in configuration

messages. This time is used in designated bridges.
This parameter is mandatory.

configured-max-age

Synopsis:

A 32-bit signed integer

The configured maximum age time from the Bridge RSTP Parameters menu.
This parameter is mandatory.

learned-max-age

Synopsis:

A 32-bit signed integer

The actual maximum age time provided by the root bridge as learned in configuration

messages. This time is used in designated bridges.

Содержание RUGGEDCOM ROX II































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RUGGEDCOM ROX II

Отзывы:

Похожие инструкции для RUGGEDCOM ROX II

Бренды по названию

Популярные бренды

Siemens RUGGEDCOM ROX II, Руководство пользователя

Результаты поиска

Содержание RUGGEDCOM ROX II

Отзывы:

Похожие инструкции для RUGGEDCOM ROX II

Бренды по названию

Популярные бренды