Siemens RUGGEDCOM ROX II, Руководство пользователя

Страница: 583 / 798

RUGGEDCOM ROX II
CLI User Guide
Chapter 13
Unicast and Multicast Routing
Deleting a Redistribution Metric 537
Where:
•
vrf is the name of the chosen VRF
3. Configure the following parameter(s) as required:
Parameter Description
metric-type { metric-type } Synopsis: An 8-bit signed integer between 1 and 2
Default: 2
The OSPF exterior metric type for redistributed routes.
metric { metric } Synopsis: A 32-bit unsigned integer between 0 and 16777214
The metric for redistributed routes.
route-map { route-map } Synopsis: A string
The route map name.
4. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section 13.9.8.3
Deleting a Redistribution Metric
To delete a redistribution metric for dynamic OSPF routes, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the metric by typing:
• For Standard OSPF Routes
no routing ospf redistribute [
bgp
|
rip
|
connected
|
static
|
kernel
]
• For VRF Routes via OSPF
no
routing ospf vrf vrf redistribute [ bgp | rip | connected | static | kernel ]
Where:
•
vrf is the name of the chosen VRF
3. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section 13.9.9
Managing Routing Interfaces
This section describes how to manage interfaces for OSPF routes.
CONTENTS
• Section 13.9.9.1, “Viewing a List of Routing Interfaces”
• Section 13.9.9.2, “Configuring a Routing Interface”