Siemens RUGGEDCOM ROX II, Руководство пользователя

Страница: 762 / 798

Chapter 16
Traffic Control and Classification
RUGGEDCOM ROX II
CLI User Guide
716 Deleting a Priority-to-CoS Mapping Entry
Parameter Description
cos { cos } Synopsis: { N/A, normal, medium, high, crit }
Default: normal
The Class of Service (CoS) assigned to received tagged frames with the specified IEEE
802.1p priority value.
4. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section 16.3.2.3
Deleting a Priority-to-CoS Mapping Entry
To delete a priority-to-CoS mapping entry, do the following:
NOTE
Deleting an entry sets the CoS to Normal.
1. Make sure the CLI is in Configuration mode.
2. Delete the entry by typing:
no
switch class-of-service priority-to-cos priority
Where:
•
priority
is the value of the IEEE 802.1p priority
3. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section 16.3.3
Managing DSCP-to-CoS Mapping
Assigning CoS to different values of the Differentiated Services Code Point (DSCP) field in the IP header of received
packets is done by defining DSCP-to-CoS mapping table entries.
CONTENTS
• Section 16.3.3.1, “Viewing a List of DSCP-to-CoS Mapping Entries”
• Section 16.3.3.2, “Adding a DSCP-to-CoS Mapping Entry”
• Section 16.3.3.3, “Deleting a DSCP-to-CoS Mapping Entry”
Section 16.3.3.1
Viewing a List of DSCP-to-CoS Mapping Entries
To view a list of priorites, type:
show running-config switch class-of-service dscp-to-cos
If entries have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config switch class-of-service dscp-to-cos | tab