manualshive.com logo in svg

Siemens RUGGEDCOM ROX II, Руководство пользователя

Пользовательский мануал для Siemens RUGGEDCOM ROX II доступен для скачивания бесплатно на нашем сайте. Этот мощный продукт обеспечивает надежное соединение в самых экстремальных условиях. Не упустите возможность ознакомиться с его инструкцией перед использованием. Скачайте мануал на manualshive.com.

Поделиться
Скачать
background image

Chapter 2

Using RUGGEDCOM ROX II

RUGGEDCOM ROX II

CLI User Guide

40

Administration Commands

Parameter

Description

admin

 shutdown

Shuts down the device.
For more information on shutting down the device, refer to 

Section 4.4, “Shutting Down the

Device”

admin

 software-upgrade decline-

upgrade

Cancels (or declines) a recent software upgrade that is waiting for a reboot to the upgraded

partition.

admin

 software-upgrade launch-

upgrade

Launches an upgrade in the alternate partition.

admin

 software-upgrade rollback-

reboot

Boots to a previous software release on the alternate partition.

maint-login

CAUTION!

Configuration hazard – risk of data loss/corruption. Maintenance mode is

provided for troubleshooting purposes and should only be used by Siemens

Canada Ltd technicians. Maintenance mode is provided for troubleshooting

purposes and all possible commands are not documented. Misuse of

maintenance mode commands can corrupt the operational state of the device

and render the device inaccessible.

Logs in to the underlying operating system as the root user. The user must be an

administrator and be able to provide the maint-login password.

monitor

 start 

filename

Starts displaying the specified system log or tracing the specified file. If necessary, the output

can be redirected to a file. For information on how to redirect output, refer to 

Section 2.5.6,

“Using Output Redirects”

. Use auto completion to view a list of available logs and files.

monitor

 stop 

filename

Stops displaying the specified system log or tracing the specified file. Use auto completion to

view a list of available logs and files.

reportstats

Displays an extensive collection of device-specific statistics. If necessary, the output can be

redirected to a file. For information on how to redirect output, refer to 

Section 2.5.6, “Using

Output Redirects”

.

config

 private

Enters a configuration mode where users can make changes to the system. This is

the primary mode for most users who want to make changes to the device/network

configuration. It can be accessed by multiple Operator and Admin users.
All changes made during a private configuration session are hidden from other users until

they are committed. Each change must be committed before it is applied to the active

system.
If a user opens an exclusive configuration session during another user's private configuration

session, the user in the private configuration session cannot commit their changes until the

other user ends their session.

config

 exclusive

Enters a configuration mode where users can make changes to the system. This mode

is similar to the private configuration mode, except all other users are blocked from

committing their changes until the user using the exclusive configuration mode exits. Only

one Operator or Admin user can use the exclusive configuration mode at a time per device.
When committing changes in exclusive configuration mode, use the confirmed option

to set a timeout period. Changes will be applied for the set period of time, after which

the configuration will be reset to its previous settings. This allows users to test their

configuration changes before fully applying them to the active system.
For more information about the confirmed option, refer to 

Section 2.5.10.5, “Configuration

Mode General Commands”

.

IMPORTANT!

Always log out of the exclusive configuration mode or exit the transaction. If

the session is terminated before a user exits properly, other users logged in to

Содержание RUGGEDCOM ROX II































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для RUGGEDCOM ROX II

Rabbit 2000 Designers Handbook preview
2000
Бренд: Rabbit Страницы: 45
Rabbit 2000 Instruction & Reference Manual preview
2000
Бренд: Rabbit Страницы: 174
Rabbit 2000 Getting Started preview
2000
Бренд: Rabbit Страницы: 43
Cabletron Systems Netlink FRX8000 Installation And Setup Manual preview
Netlink FRX8000
Бренд: Cabletron Systems Страницы: 94
Cabletron Systems MMAC-Plus 9E423-24 Reference Manual preview
MMAC-Plus 9E423-24
Бренд: Cabletron Systems Страницы: 10
Cabletron Systems MMAC-Plus 9A128-01 Management Manual preview
MMAC-Plus 9A128-01
Бренд: Cabletron Systems Страницы: 22
Cabletron Systems Spectrum EMM-E6 Addendum Manual preview
Spectrum EMM-E6
Бренд: Cabletron Systems Страницы: 2
Cabletron Systems SmartSTACK ELS100-24TXG Installation And User Manual preview
SmartSTACK ELS100-24TXG
Бренд: Cabletron Systems Страницы: 112
Cabletron Systems ESX-1380 Management Manual preview
ESX-1380
Бренд: Cabletron Systems Страницы: 86
Cabletron Systems DLM6C-AA Overview And Setup Manual preview
DLM6C-AA
Бренд: Cabletron Systems Страницы: 54
Cabletron Systems Cabletron BRIM-F6 User Manual preview
Cabletron BRIM-F6
Бренд: Cabletron Systems Страницы: 43
Cabletron Systems Netlink FRX4000 Maintenance Manual preview
Netlink FRX4000
Бренд: Cabletron Systems Страницы: 60
Cabletron Systems CSX200 CyberSWITCH Setup Manual preview
CSX200 CyberSWITCH
Бренд: Cabletron Systems Страницы: 2
Cabletron Systems 9E132-15 Appendix preview
9E132-15
Бренд: Cabletron Systems Страницы: 8
Cabletron Systems TRXI-22 Addendum preview
TRXI-22
Бренд: Cabletron Systems Страницы: 4
ICP DAS USA I-7532M-FD User Manual preview
I-7532M-FD
Бренд: ICP DAS USA Страницы: 48
ICP DAS USA WF-2572 User Manual preview
WF-2572
Бренд: ICP DAS USA Страницы: 24
ICP DAS USA MSM-508 Quick Start preview
MSM-508
Бренд: ICP DAS USA Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды