Siemens RUGGEDCOM ROX II Скачать руководство пользователя

Страница: 151 / 798

RUGGEDCOM ROX II

CLI User Guide

Chapter 5

System Administration

Enabling and Configuring WWW Interface Sessions

105

1. Make sure the CLI is in Configuration mode.
2. Navigate to

admin » session-limits

and configure the following parameter(s) as required:

Parameter

Description

max-sessions-total { max-sessions-total }

Synopsis:

a 32-bit unsigned integer

Default:

Puts a limit on the total number of concurrent sessions to ROX.

3. Type

commit

and press

Enter

to save the changes, or type

revert

and press

Enter

to abort.

Section 5.5

Enabling and Configuring WWW Interface Sessions

To enable and configure WWW interface sessions, do the following:
1. Make sure the CLI is in Configuration mode.
2. Navigate to

admin » webui

and configure the following parameter(s) as required:

Parameter

Description

enabled

Synopsis:

{ true, false }

Default:

true

Provides the ability to configure WebUI features on the device.

listen-ip { listen-ip }

Synopsis:

A string

Default:

0.0.0.0

The IP Address the CLI will listen on for WebUI requests.

port { port }

Synopsis:

A 16-bit unsigned integer between 0 and 65535

Default:

443

The port on which the WebUI listens for WebUI requests.

extra-ip-ports { extra-ip-ports }

Synopsis:

A string

The WebUI will also listen on these IP Addresses. For port values, add ':#' to set non-

default port value. (ie. xxx.xxx.xxx.xxx:19343 [::] [::]:16000). If using the default

address, do not specify another listen address with the same port.

max-sessions { max-sessions }

Synopsis:

a 32-bit unsigned integer

Default:

The maximum number of concurrent WebUI sessions

idle-timeout { idle-timeout }

Synopsis:

A string

Default:

PT30M

The maximum idle time before terminating a WebUI session. If the session is waiting for

notifications, or has a pending confirmed commit, the idle timeout is not used. A value

of 0 means no timeout. PT30M means 30 minutes.

ssl-redirect-enabled

Synopsis:

{ true, false }

Default:

true

Redirects traffic from port 80 to port 443. If disabled, port 80 will be closed.

client-certificate-verification { client-

certificate-verification }

Synopsis:

{ none, peer, fail-if-no-peer-cert }

Default:

none

Level of verification the server does on client certificates
• none - It does not do any verification.

Содержание RUGGEDCOM ROX II































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RUGGEDCOM ROX II

Отзывы:

Похожие инструкции для RUGGEDCOM ROX II

Бренды по названию

Популярные бренды

Siemens RUGGEDCOM ROX II, Руководство пользователя

Результаты поиска

Содержание RUGGEDCOM ROX II

Отзывы:

Похожие инструкции для RUGGEDCOM ROX II

Бренды по названию

Популярные бренды