Siemens RUGGEDCOM ROX II Скачать руководство пользователя

Страница: 321 / 798

RUGGEDCOM ROX II

CLI User Guide

Chapter 8

Layer 2

Viewing RMON Port Statistics

275

pkts 1024to1518 octets 1640

This table or list provides the following information:

Parameter

Description

in-octets

Synopsis:

A 64-bit unsigned integer

The number of octets in received good packets (MuBroadcast) and dropped

packets.
This parameter is mandatory.

in-pkts

Synopsis:

A 64-bit unsigned integer

The number of received good packets (MuBroadcast) and dropped packets.
This parameter is mandatory.

in-bcast-pkts

Synopsis:

A 64-bit unsigned integer

The number of good broadcast packets received.
This parameter is mandatory.

in-mcast-pkts

Synopsis:

A 64-bit unsigned integer

The number of good multicast packets received.
This parameter is mandatory.

total-in-octets

Synopsis:

A 64-bit unsigned integer

The total number of octets of all received packets. This includes data octets of rejected and

local packets which are not forwarded to the switching core for transmission. It should

reflect all the data octets received on the line.
This parameter is mandatory.

total-in-pkts

Synopsis:

A 64-bit unsigned integer

The number of received packets. This includes rejected, dropped and local packets, as well as

packets which are not forwarded to the switching core for transmission. It should reflect all

packets received on the line.
This parameter is mandatory.

out-octets

Synopsis:

A 64-bit unsigned integer

The number of octets in transmitted good packets.
This parameter is mandatory.

out-pkts

Synopsis:

A 64-bit unsigned integer

The number of transmitted good packets.
This parameter is mandatory.

drop-events

Synopsis:

A 32-bit unsigned integer

The number of received packets that are dropped due to lack of receive buffers.
This parameter is mandatory.

out-bcast-pkts

Synopsis:

A 64-bit unsigned integer

The number of transmitted broadcast packets.
This parameter is mandatory.

out-mcast-pkts

Synopsis:

A 64-bit unsigned integer

The number of transmitted multicast packets. This does not include broadcast packets.
This parameter is mandatory.

crc-align-errors

Synopsis:

A 32-bit unsigned integer

The number of packets received which meet all the following conditions: 1. The packet data

length is between 64 and 1536 octets inclusive. 2. The packet has invalid CRC. 3. A Collision

Event has not been detected. 4. A Late Collision Event has not been detected.

Содержание RUGGEDCOM ROX II































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RUGGEDCOM ROX II

Отзывы:

Похожие инструкции для RUGGEDCOM ROX II

Бренды по названию

Популярные бренды

Siemens RUGGEDCOM ROX II, Руководство пользователя

Результаты поиска

Содержание RUGGEDCOM ROX II

Отзывы:

Похожие инструкции для RUGGEDCOM ROX II

Бренды по названию

Популярные бренды