Siemens Rapidlab 1200 Скачать руководство пользователя страница 339

Страница: 339 / 448

Rapidlab 1200 Operator’s Guide: System Configuration

8-45

02087462 Rev. V

To set up maintenance tasks on your system, perform the following steps:

1. At the Setup screen, select

Secured Options

2. Select the down arrow button and then select

Maintenance

3. Select

Setup Schedule

4. At the Setup Maintenance screen, select and perform the following tasks as

necessary:

For this task...

Then...

Add a maintenance task, a.

Select

Add

b. Enter a Description.
c.

Edit the Frequency.

d. Edit the Task Due On.
e.

Select

Save

Edit the frequency of a
predefined or user
defined maintenance
task,

Select a task.

b. Select

Edit

NOTE:

You cannot decrease the frequency of a predefined

task. You can only increase it. You cannot edit the name of a
predefined task.
c.

Select

Frequency

d. Select the frequency.

The system displays screens for selecting a time period
or set of times appropriate to your selection.

Select

Save

The Save button is not available until you make all the
necessary selections.

Delete a user defined
maintenance task,

Select a task.

b. Select

Delete

NOTE:

User defined maintenance tasks are the only tasks

you may delete. When you select a predefined maintenance
task, the Delete button is disabled.
c.

Select

Yes

Enable and disable
maintenance tasks,

Select a task.

b. Select

Edit

Select

Enable

View maintenance task
details,

select

Details

Содержание Rapidlab 1200

































































































































































































































































































































































































































































Результаты поиска

Содержание Rapidlab 1200

Отзывы:

Siemens Rapidlab 1200, Руководство оператора, Страница: 339 / 448

Результаты поиска

Содержание Rapidlab 1200

Отзывы: